Spectra Precision ProFlex 800 Reference Manual - Manual (Page 324)

310
Set Command Library
ANH: Antenna Height
Function This command allows you to enter the antenna height
measured according to the vertical measurement technique.
Even if not specified explicitly, the height measurement type
will always be “Vertical”.
Command Format Syntax
$PASHS,ANH,f1[,c2][*cc]
Parameters
Example
Entering the vertical measurement (2 m) of a rover antenna:
$PASHS,ANH,2.000
Comments
When you enter an antenna height greater than 6.553 m, be
aware this will NOT be the value of antenna height broadcast
through RTCM messages and the one saved to the G-file.
Instead, a fixed value of 6.553 meters will be provided.
Relevant Query
Command
$PASHQ,ANH
See also $PASHS,ANR
$PASHS,ANT
ANP,DEL: Delete User-Defined Antenna
Function This command allows you to delete the definition of a user-
defined antenna.
Parameter Description Range
f1 Antenna height.
0-6.553 m
6.553-100 m (see
comment)
c2
Antenna height measurement type (V
for “Vertical”)
V
*cc Optional checksum *00-*FF