Spectra Precision ProFlex 800 Reference Manual - Manual (Page 596)

582
Query Command Library
Relevant Set
Command
$PASHS,MWD
See also $PASHQ,MDM
NMO: NMEA Message Output Settings
Function This command is used to query the types of NMEA messages
currently enabled on the specified port.
Command Format Syntax
$PASHQ,NMO,c[*cc]
Parameters
Response Format Syntax
$PASHR,NMO,c1,d2,f3,d4,n(s5,f6)*cc
(n=18)
Parameters
Parameter Description Range
c
Queried port ID:
• A, B, F: Serial port
• C: Bluetooth port
• I, P, Q, I1-I9: Ethernet port
• E: Modem
• M, U: Memory
• R: Automatic recording session
A, B, C, E, F, I, M, P,
Q, R, U, I1-I9
*cc Optional checksum *00-*FF
Parameter Description Range
c1
Queried port ID:
• A, B, F: Serial port
• C: Bluetooth port
• I, P, Q, I1-I9: Ethernet port
• E: Modem
• M, U: Memory
• R: Automatic recording session
A, B, C, E, F, I, M,
P, Q, R, U, I1-I9
d2 Baud rate code
0-15 (A, B, F)
0, 1 (C, E, I, M, P,
Q, U, I1-I9)