Spectra Precision ProFlex 800 Reference Manual - Manual (Page 417)

403
Set Command Library
MET,INTVL: Query Time Interval for Meteo Data
Function This command is used to define the time interval through
which the receiver will regularly ask the meteorological unit
to return the current values of meteo data. The command also
specifies the ID of the receiver port used to communicate
with the meteorological unit.
By default, the receiver will query the meteorological unit
every 5 seconds once the receiver has notified the
meteorological unit, through the $PASHS,OUT,x,MET,ON
command,to start operating.
Command Format Syntax
$PASHS,MET,INTVL,c1,d2[*cc]
Parameters
Example
Setting query interval to 10 seconds:
$PASHS,MET,INTVL,A,10*0C
Relevant Query
Command
$PASHQ,MET
See Also $PASHS,MET,CMD
$PASHS,MET,INIT
$PASHS,OUT,x,MET
Parameter Description Range Default
c1
Receiver serial port connected to the meteoro-
logical unit.
A, B, F
d2 Query interval, in seconds 5-9999 5
*cc Optional checksum *00-*FF