Spectra Precision ProFlex 800 Reference Manual - Manual (Page 186)

172
Web Server Help Files Collection
Data format:
Data Output This page is used to define the data messages delivered by
the receiver on its various ports. The following groups of
parameters need to be defined:
• Differential messages
• NMEA messages
• Raw data
These groups of parameters are detailed below.
Differential Messages
Use this page to define the differential messages generated
by a base. The following data formats are possible:
• ATOM
• CMR
• RTCM 2.3
• RTCM 3.0 & 3.1
• DBEN
Initialization string
Define the string used by the receiver
to initialize the tiltmeter, if connected
to this port.
TLT
Trigger string
Define the string used by the receiver
to query the tiltmeter, if connected to
this port.
TLT
Interval
Set the time interval, in seconds, used
by the receiver to query the tiltmeter, if
connected to this port.
TLT
Parameter Designation $PASHS
“Legacy D-File
Support” check
box
Tiltmeter data are part of the data saved in G-
files. If you check this option, they will also be
saved as separate D files (Ashtech legacy for-
mat).
RFT
Parameter Designation $PASHS