Spectra Precision ProFlex 800 Reference Manual - Manual (Page 183)

169
Web Server Help Files Collection
Port I Settings:
DynDNS:
Parameter Designation $PASHS
Mode
Choose the type of protection required to
control receiver access from the Internet
through its Ethernet port I. Choose one of the
options below:
• Disabled: No communication with the
receiver is possible.
• Enabled: Communication is allowed with-
out restriction.
• Secured: Communication with the receiver
is enabled only after a login and password
have been provided (the receiver can
however output data through the Ethernet
port even if no login and password have
not been provided yet).
TCP,PAR
Protocol
A read-only field showing the currently
selected IP protocol (TCP or UDP) on port I.
$PASHQ,DST
Port
Enter the IP port number (100-65535)
through which a connection with the receiver
is possible (default: 8888).
TCP,PAR
Login
Enter the login (32 characters max.) required
of users in the case of a secured connection.
TCP,PAR
Password
Enter the password (32 characters max.)
required of users in the case of a secured
connection.
TCP,PAR
(Show characters)
Use this option to show or hide the above
password. When hidden, the password is
replaced with “*” characters.
-
Parameter Designation $PASHS
Activation
Use this button to activate or deactivate the
use of the DynDNS server.
DDN,PAR
System Name of the DynDNS server. DDN,PAR
Hostname The hostname you chose for your receiver. DDN,PAR
Username, pass-
word
Username and password of your DynDNS
account (see below how to create an account
and choose the type of service you are
expecting from the DynDNS server). The
DynDNS server will accept the receiver’s new
IP address only if it is provided by an
authorized user.
DDN,PAR
Period
Choose the rate at which the receiver should
regularly inform the DynDNS server of its
own IP address.
DDN,PAR