Spectra Precision ProFlex 800 Reference Manual - Manual (Page 195)

181
Web Server Help Files Collection
File Move
Set this pane when you wish to store record files locally so
that users can download these files through an IP connection
using the embedded FTP server.
Hatanaka
This option can be used in conjunction with one of
the previous two ones to convert G-files to Rinex
2.11 or 3.01 in Hatanaka format.
SES,PAR
Tar.Z
Use this option to compress G-files in Tar.Z format.
Can be used together with option Rinex 2.11 or
3.01.
SES,PAR
Delete Origi-
nal G-File Use this option to remove original G-files after they
have been converted and compressed.
SES,PAR
Change Rate
Enable this option if you wish to use a measure-
ment period different from the one used in the G-file
RXC,PAR
Rate
This field will appear if you have enabled the
Change Rate option. Enter the new measurement
period that will be used when converting the G-file
to a RINEX file.
RXC,PAR
Create 2nd
RINEX File Enable this option if you wish to create two RINEX
files, instead of one, when converting the G-file.
SES,PAR
Second Rate
This field will appear if you have enabled the Create
2nd RINEX File option. Enter the measurement
period that will be used when converting the G-file
to a second RINEX file.
SES,PAR
Disable
GLONASS Enabling this option will result in rejecting all GLON-
ASS measurements from the RINEX conversion.
RXC,PAR
Disable SBAS
Enabling this option will result in rejecting all SBAS
measurements from the RINEX conversion.
RXC,PAR
Disable GALI-
LEO Enabling this option will result in rejecting all GALI-
LEO measurements from the RINEX conversion.
RXC,PAR
Parameter Designation $PASHS
Move Converted
Files
Use this option to ask the receiver to move the
record files to the specified location (see below)
once they have been converted to the specified
format (see table above)
SES,PAR
Move G-Files
Use this option to ask the receiver to move the
original record files (G-files) to the specified loca-
tion (see below) once they have been created.
SES,PAR
Destination Loca-
tion
Tell the receiver where to store record files (in its
internal memory or to some connected USB
device)
SES,PAR
Parameter Designation $PASHS