Spectra Precision ProFlex 800 Reference Manual - Manual (Page 300)

286
Ethernet Connection
Terminology used:
ProFlex 800 used in server mode: The ProFlex 800 receives
a data request from an outside equipment through its
Ethernet port via an IP connection. The outside equipment
needs to know the IP address (and IP port) or host name of
the ProFlex 800 to be able to establish a communication with
the receiver.
ProFlex 800 used in client mode: The ProFlex 800 sends a
data request to an outside equipment through its Ethernet
port via a TCP/IP connection. The ProFlex 800 needs to know
the IP address (and IP port) or host name of the outside
equipment to be able to establish a bidirectional
7-pin
Ethernet
Port
Administrator
User
NTRIP server, Direct IP,
Port P, port Q,
client
Serial-like Connection,
Server mode,
Port I (default IP port: #8888)
FTP,
Client mode,
Default IP port: #21,
Uploading raw data files
Downloading firmware upgrade
Data Streaming,
Ports I1 to I9, client or server
Default IP ports: #1001 to #1009
FTP server,
Server mode,
Default IP port: #21
Web Server
(Server, default
IP port: #80)
Embedded
NTRIP Caster
(Firmware option, Server,
default IP port: #2101)