Spectra Precision ProFlex 800 Reference Manual - Manual (Page 698)

684
Data Output
Reminder on How
to Output SNG
Messages
Use the $PASHS,RAW command with the syntax below:
$PASHS,RAW,SNG,,ON,
For more details on the $PASHS,RAW command, refer to the
Set Command Library Chapter.
As an example, the command below will output SNG
messages on port A at a rate of 15 seconds:
$PASHS,RAW,SNG,A,ON,15
Unsigned
short Check-
sum
2
The checksum is computed by breaking the
structure into 40 unsigned shorts, adding
them together, and taking the least significant
16 bits of the result.
Total 82
Type Name Size Contents