Spectra Precision ProFlex 800 Reference Manual - Manual (Page 414)

400
Set Command Library
MEM: Selecting Memory Device Used
Function This command is used to select the memory used by the
receiver for data storage.
Command Format Syntax
$PASHS,MEM,d[*cc]
Parameters
Example
Selecting internal memory as the memory used by the
receiver:
$PASHS,MEM,0*2C
Relevant Query
Command
$PASHQ,MEM
See also $PASHS,FIL,D
$PASHQ,FLS
$PASHQ,FIL,LST
MET,CMD: Trigger String Querying Meteorological Unit
Function This command is used to define the character string that will
query the meteorological unit. The command also specifies
the ID of the receiver port used to communicate with the
meteorological unit.
The trigger string is in the form “*xxxxxx” and the default one
is *0100P9.
Parameter Description Range Default
d
Memory used:
• 0: Internal memory (NAND Flash)
• 2: USB mass storage key
0, 2 0
*cc Optional checksum *00-*FF