Spectra Precision ProFlex 800 Reference Manual - Manual (Page 314)

300
Using Serial Commands
In each of the two tables below, the commands appear in
alphabetical order. All pairs of related set and query
commands (e.g. $PASHS,ANH and $PASHQ,ANH) appear in
the same row.
Receiver
Antenna
Set Command Description Query Command Description
$PASHS,ATL Debug data recording $PASHQ,ATL Debug data recording
$PASHS,BEEP Beeper $PASHQ,BEEP Beeper
$PASHS,CMD,LOD Running a command file
$PASHS,CMD,WTI Inserting wait time
$PASHS,INI Receiver initialization
$PASHQ,LOG Editing a log file
$PASHS,LOG,DEL Deleting log files
$PASHQ,LOG,LST Listing log files
$PASHS,LOG,PAR Log file settings $PASHQ,LOG,PAR Log file settings
$PASHS,OPTION Receiver firmware options $PASHQ,OPTION Receiver firmware options
$PASHQ,PAR Receiver parameters
$PASHS,PAR,LOD Load Receiver Configuration
$PASHS,PAR,SAV Save Receiver Configuration
$PASHS,PWR,OFF Powering off the receiver $PASHQ,PWR Power status
$PASHS,PWR,PAR Power management
$PASHS,PWR,SLP Sleep mode
$PASHQ,RCP Receiver parameters
$PASHQ,RID Receiver identification
$PASHS,RST Default settings
$PASHS,UNT Distance unit used on display $PASHQ,UNT Distance unit used on display
$PASHQ,VERSION Firmware version
$PASHS,WAK Alarm acknowledgment
$PASHQ,WARN Warning messages
Set Command Description Query Command Description
$PASHS,ANH Antenna height $PASHQ,ANH Antenna height
$PASHS,ANP Antenna parameters $PASHQ,ANP Antenna parameters
$PASHS,ANP,DEL Deleting user-defined antenna
$PASHS,ANP,OUT Defining the virtual antenna $PASHQ,ANP,OUT Virtual antenna
$PASHS,ANP,OWN
$PASHS,ANP,OW2
$PASHS,ANP,REF Defining local antenna name
Defining second antenna name
Defining ref. antenna name $PASHQ,ANP,OWN
$PASHQ,ANP,OW2
$PASHQ,ANP,REF Local antenna
Local antenna (second one)
Antenna used at the base
$PASHQ,ANP,RCV
Antenna Name & Offsets of
Received Base
$PASHS,ANR Antenna reduction mode $PASHQ,ANR Antenna reduction mode
$PASHS,ANT Antenna height $PASHQ,ANT Antenna height