Spectra Precision ProFlex 800 Reference Manual - Manual (Page 112)

98
Web Server Help Files Collection
To change the units, select your preference from the Units
pane on the left-hand side of the Web Server window. This
pane is visible in both the
Status and Configuration tabs.
Distance Units • Meters
• US Survey Feet
• International Feet
Angle Units The possible formats for angles, including latitudes and
longitudes, are the following:
Modem
Modem power status (“Off”, “On”, “Starting”, “Ready”, “Dialing”, “Online” or
“None”)
Level Input signal level (0 to 100, or blank when Modem Status= Online)
NTRIP Caster
“off” or, if “On”, number of sources available (S:xx) and number of connected cli-
ents (,C:xxx)
Column #6
Recording
Raw data recording status (“On” or “Off”)
Site Name Site name (4 characters) attached to logged data
Memory
Identification of memory used (“M” for internal, “U” for USB key)+ Number of free
Megabytes on this memory.
Column #7
Sessions
Session status (“ON” “OFF”, “RECORDING”)
Site Name Site name (4 characters) attached to data logged through sessions
Memory
Identification of memory used (“M” for internal, “U” for USB key)+ Number of free
Megabytes on this memory.
FTP Push
Indicates whether the recorded raw data files are uploaded to an external FTP
server (“On”) or not (“Off”).
Column #8
Date
Current date (YYYY-MM-DD)
Time Current local or UTC time (hh:mm:ss) according to the setting below.
Alarm report
Blank area if no alarm has been detected.
“Alarms” displayed if an alarm has been detected in the receiver, followed by the
number of raised alarms, between brackets (x).
A click on “Alarms” will open the Status-Alarms web page to list this or these
alarms.