Spectra Precision ProFlex 800 Reference Manual - Manual (Page 373)

359
Set Command Library
Command Format Syntax
$PASHS,CTS,[c1],s2[*cc]
Parameters
Examples
Disabling RTS/CTS on port A:
$PASHS,CTS,A,OFF*3F
Disabling RTS/CTS on the current port:
$PASHS,CTS,,OFF*7E
Relevant Query
Command
$PASHQ,CTS
See also $PASHS,PRT
$PASHS,MDP
DBN,TYP: DBEN Message Type & Output Rate
Function This command is used in a base to define the type of DBEN
message the base should generate (type and rate). Enabling
or disabling the output of the DBEN message is made through
$PASHS,BAS or $PASHS,BDS.
Command Format Syntax
$PASHS,DBN,TYP,s1,d2[*cc]
Parameter Description Range Default
c1 Port ID A, B, F
s2 RTS/CTS control ON, OFF ON
*cc Optional checksum *00-*FF