Spectra Precision ProFlex 800 Reference Manual - Manual (Page 209)

195
Web Server Help Files Collection
Mount Points The Mount Points page allows you to declare all the data
streams the NTRIP caster will be able to forward to users.
Behind each mount point is a specific NTRIP server providing
a specific format of data corrections from a given location.
The receiver hosting the NTRIP caster can also be configured
to operate one or even two independent NTRIP servers. Two
of the possible mount points can therefore represent NTRIP
servers operated at the same location as the NTRIP caster,
but each delivering a specific data stream.
Mount Point:
For each new mount point, define the following parameters:
Web Address for
Stream Information
Enter the address of the web site where
users can get additional information about
data streams available from the NTRIP
caster.
CST,PAR
Web/Email Address
for Registration
Enter the address of the web site where
users can get additional registration informa-
tion about the NTRIP caster.
CST,PAR
Parameter Designation $PASHS
Parameter Designation $PASHS
Name
Enter the mount point name. This is an import-
ant parameter because it is through that name
that users choose the source of corrections they
want and it is also through that name that the
NTRIP caster can select the NTRIP server pro-
viding the corrections that users are requesting.
CST,MTP,ADD
Identifier
Enter the source identifier, e.g. the name of the
city next to the source location.
CST,MTP,ADD