Spectra Precision ProFlex 800 Reference Manual - Manual (Page 429)

415
Set Command Library
Comments
• When activating GLONASS or GNSSL2, it is essential that
you modify the receiver configuration, using $PASHS,GPS
and $PASHS,GLO to enable the tracking of the new
signals. Alternatively, you can run $PASHS,RST to update
the default configuration, taking into account all the
activated firmware options.
• Firmware options may be activated for limited periods of
time, depending on the type of unlock code generated for
each of them. Several validity times are possible:
– Permanent
– 6 months
– 3 months
– 1 month
– 30 days
– 15 days
– 8 days
Example
Enabling the RTK option:
$PASHS,OPTION,K,878A8874*48
Relevant Query
Command
$PASHQ,OPTION
See also $PASHQ,RID