Spectra Precision ProFlex 800 Reference Manual - Manual (Page 143)

129
Web Server Help Files Collection
Receiver
antenna
Select the name of the antenna used at the base.
This antenna name can only be chosen from a list
of antenna names stored in the receiver.
UNKNOWN, NULLANTENNA, ADVNULLAN-
TENNA are special definitions of antennas typi-
cally used as virtual antennas.
ANP,OWN
Antenna
Radius
(Only if “Slant Height” measurement type
selected). Enter the antenna radius according to
the selected distance unit.
ANT
SHMP Offset
(Only if “Slant Height” measurement type
selected). Enter the vertical offset of the Slant
Height Measurement Point for the antenna used
by the rover. Take care to enter this parameter in
the selected distance unit. See also the Note
below.
ANT
Virtual Antenna
This parameter allows you to define a virtual
antenna:
• Select “Off” if you do not want to define one
• If you want one, select the virtual antenna
name for which you would like the receiver to
deliver raw data, i.e. as if the raw data had
been collected using this antenna.
This antenna name can only be chosen from a
list of antenna names stored in the receiver.
NULLANTENNA, ADVNULLANTENNA, etc.
are the most commonly used virtual antennas.
ANP,OUT
Parameter Designation $PASHS
ARP
SHMP Offset
Antenna radius
SHMP