Spectra Precision ProFlex 800 Reference Manual - Manual (Page 126)

112
Web Server Help Files Collection
Radio The Radio page provides the current configuration of the
internal or external radio used by the receiver. Typically, the
receiver will use either an internal or external radio.
Internal Radio:
Access Point
Access point name allowing the
modem to establish a connection to
the mobile communication provider
MDM
Access Point Login
Login required for a successful con-
nection
MDM
Parameter Designation $PASHQ
Parameter Designation $PASHQ
Type
Indicates the model of radio used by the
receiver.
RDP,TYP
Power Tells you if the radio is currently on or off. RDP,PAR
Automatic Power
Indicates whether the radio is powered in
automatic (Yes) or Manual mode (No).
RDP,PAR
Channel
Gives the channel number corresponding to
the carrier frequency the radio is currently
receiving.
RDP,PAR
Protocol
Indicates the protocol used to demodulate
the received data.
RDP,PAR
Airlink Speed
Indicates the speed at which the received
data are modulated by the base transmitter.
This allows the radio to properly demodulate
the received signal.
RDP,PAR
Sensitivity
Current sensitivity setting for the radio (Low,
Medium, High).
RDP,PAR
Scrambler Current Scrambler setting (On or Off) RDP,PAR
Forward Error Cor-
rection (FEC)
Current FEC setting (On or Off)) RDP,PAR