Spectra Precision ProFlex 800 Reference Manual - Manual (Page 525)

511
Query Command Library
$PASHQ,ATL*2E
$PASHR,ATL,ON,0,S,0.5,0*78
ATM: ATOM Data Parameters
Function This command allows you to read the current settings of the
ATOM data-related parameters.
Command Format Syntax
$PASHQ,ATM[*cc]
Response format Syntax
(Through an example)
$PASHQ,ATM
PER:020.00 ELM:10
DRI:001.00 SIT:abcd REC:Y MEM:M
ANH:02.132 ANT:SLANT ANR:ON
ATOM: MES PVT ATR NAV DAT EVT BAUD
PRTA: OFF OFF OFF OFF OFF OFF 6
PRTB: OFF OFF OFF OFF OFF OFF 6
PRTC: OFF OFF OFF OFF OFF OFF 1
PRTE: OFF OFF OFF OFF OFF OFF 1
PRTF: OFF OFF OFF OFF OFF OFF 6
PRTI: OFF OFF OFF OFF OFF OFF 1
MEMM: OFF OFF OFF OFF OFF OFF 1
MEMR: OFF OFF OFF OFF OFF OFF 1
MEMU: OFF OFF OFF OFF OFF OFF 0
I1: OFF OFF OFF OFF OFF OFF 0
I2: OFF OFF OFF OFF OFF OFF 0
I3: OFF OFF OFF OFF OFF OFF 0
I4: OFF OFF OFF OFF OFF OFF 0
I5: OFF OFF OFF OFF OFF OFF 0
I6: OFF OFF OFF OFF OFF OFF 0
I7: OFF OFF OFF OFF OFF OFF 0
I8: OFF OFF OFF OFF OFF OFF 0
I9: OFF OFF OFF OFF OFF OFF 0
Parameters
Parameter Description Range
PER ATOM output rate 0.00-999.0 s
ELM
Elevation mask used in data recording &
data output
0-90
DRI Recording rate 0.00-999.0 s