Spectra Precision ProFlex 800 Reference Manual - Manual (Page 618)

604
Query Command Library
Where:
• d1 is the number of pre-defined receivers
• d2 is the number of user-defined receivers
• “Own receiver” refers to the name of the receiver
• “Reference receiver” provides the name of the base
receiver, as set through the command $PASHS,RCP,REF
• “Received receiver” provides the name of the base
receiver, as received through the differential data stream.
$PASHQ,RCP,s1 provides the GLONASS carrier phase biases
for the specified, user-defined receiver.
$PASHQ,RCP,MyReceiver
MyReceiver:
L1 BIAS: +0.059,+0.613 +0.671 +0.729 +0.786 +0.829 +0.898 +0.949
+0.000 +0.059 +0.112 +0.182 +0.253 +0.312 +0.373
L2 BIAS: +0.049,+0.667 +0.714 +0.761 +0.808 +0.849 +0.893 +0.947
+0.000 +0.044 +0.102 +0.153 +0.201 +0.254 +0.292
See Also $PASHS,RCP,REF
$PASHS,RCP,GB1
$PASHS,RCP,GB2
RCP,OWN: Receiver Name
Function This command is used to read the name assigned to the
receiver.
Command Format Syntax
$PASHQ,RCP,OWN[*cc]
Parameters
None.
Response format Syntax
$PASHR,RCP,OWN,s1*cc
Parameters
Parameter Description Range
s1 Receiver name ProFlex800