Spectra Precision ProFlex 800 Reference Manual - Manual (Page 646)

632
Query Command Library
See Also $PASHS,SES,PAR
$PASHS,SES,SET
$PASHS,SES,AUT
BACKUP
FTP TRANS-
FER
Operating mode assigned to backup FTP
server:
• 0: Not used
• 1: Used only when primary FTP server is
inaccessible
• 2: Used in parallel to primary FTP
0-2
FTP Backup FTP server address
PRT Backup FTP port 0-65535
LGN Backup FTP login
PWD Backup FTP password
PATH Path used on backup FTP server
RINEX CON-
VERSION
RINEX conversion:
• N: No RINEX conversion
• 2.11: Conversion to RINEX 2.11
• 2.11H: Conversion to RINEX 2.11Ha-
tanaka
• 3.01: Conversion to RINEX 3.01
• 3.01H: Conversion to RINEX 3.01Ha-
tanaka
N, 2.11, 2.11H,
3.01, 3.01H
GLONASS
GLONASS data conversion:
• ON: GLONASS measurements converted.
• OFF: GLONASS measurements not con-
verted.
ON, OFF
SBAS
SBAS data conversion:
• ON: SBAS measurements converted.
• OFF: SBAS measurements not converted.
ON, OFF
GALILEO
GALILEO data conversion:
• ON: GALILEO measurements converted.
• OFF: GALILEO measurements not con-
verted.
ON, OFF
PERIOD1
Period of RINEX measurements, in seconds.
“0” means the period used is the same as
that used in the G-file.
0-60
PERIOD2
Period of RINEX measurements, in seconds,
for the second RINEX file. A second RINEX
file is generated only if the period is defined
as different from “0”.
0-60
*cc Checksum *00-*FF
Parameter Description Range