Spectra Precision HV301 Interior Laser User Manual
Spectra precision hv301, Hv301 applications interior, General construction

Multipurpose Construction
Laser for Interior and Exterior
Applications
Tough, Highly Versatile Interior and
General Construction Laser
The automatic, self-leveling Spectra Precision
®
HV301 laser is an economical laser with
exceptional versatility and visibility. Whether
your job is indoors or outdoors, the HV301
laser handles a wide variety of horizontal,
vertical and plumb applications, as well as
interior applications with a high-visibility beam
enabling simultaneous rotating and 90-degree
references. The HV301 laser beam is easy to
see in any interior jobsite conditions.
The HV301 laser transmitter sends a continuous,
self-leveled 360-degree laser reference over
your entire work area. Designed to be used by
any contractor, anywhere, the HV301 laser is
easy to set up and use and is rugged enough
for the toughest job site. Intuitive controls allow
operators to carry out many functions with
simple “one-touch” commands. Highly durable
construction and IP54 sealing enable the HV301
laser to survive a drop of up to 1 meter (3 feet)
onto concrete and to be unaffected by dust or
moisture.
The HV301 Laser Interior Package
includes:
• HV301 Laser
• 360-degree IR remote control
• Rechargeable batteries and charger
• Wall mount
• Ceiling target
• Operator’s manual
• Hard carrying case
The HV301 Laser General Construction
Package includes:
• HV301 Laser
• HL450 Laserometer
• Rechargeable batteries and charger
• Operator’s manual
• Hard carrying case
Additional accessories are available for added
versatility and increased jobsite productivity.
Spectra Precision HR150 Receiver
for Interior Construction
The HR150 receiver features a built-in magnet
and mounts to grid or track. The dual LED
displays with green on-grade can be easily seen
in brightly lit indoor or outdoor applications such
as soffit, curtain-wall, or glazing.
Spectra Precision HL450 Laserometer
for General Construction
The HL450 features a digital readout that
provides a numeric display of ±1.5 inches or
±38 mm. The readout is displayed on the large
front and rear LCD’s and shows exactly how
far the elevation is from on-grade. The HL450
has a large 4 inch (102 mm) reception height for
quick beam acquisition. An anti-strobe sensor
prevents construction site strobe lights from
setting it off.
HV301 Applications
Interior
•
Acoustical ceiling
installation
•
Drywall installation
•
Squaring/layout
•
Interior finishing work
General Construction
•
Residential construction
•
Small-to-medium
commercial construction
•
Leveling
•
Squaring/layout
•
Vertical alignment
•
Plumb
Spectra Precision HV301