Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 94)

Teledyne LeCroy Corporation Status Bar
94 USB Protocol Suite User Manual
 Pre‐Trigger progress is in the field to the left of the Trigger Position in the before‐
trigger color specified in the Display Options.
 When the Trigger Position is reached, the indicator wiggles as it waits for the
trigger.
 After the trigger occurs, the field to the right of the Trigger Position fills with the
after‐trigger color specified in the Display Options.
 When recording is complete, the upper half of the progress indicator fills with
white, indicating the progress of the data upload to the host machine.
You should be aware of two exceptional conditions:
 If a Trigger Event occurs during the before‐trigger recording, the before‐trigger
color changes to the after‐trigger color to indicate that not all the expected data
was recorded pre‐trigger.
 When you click Stop before or after a Trigger Event, the Status Bar adjusts
accordingly to begin uploading the most recently recorded data.
The indicator fills with color in proportion to the specified size and actual rate at which
the hardware is writing and reading the recording memory. However, the indicator is
normalized to fill the space within the Status Bar.
4.6.2 Recording Status
During recording, the current Recording Status is in a segment. When you activate the
Record function, this segment flashes a message depending on the selected
Recording Options, such as Waiting for Trigger, Uploading or Rec/Uploading.
The status bar displays Waiting for Trigger while waiting for trigger to occur based on the
settings defined in the Recording Options.
Figure 4.9: Status Bar - Waiting For Trigger
The status bar displays Uploading when recording is complete and is being uploaded.
Figure 4.10: Status Bar - Uploading
The status bar displays Rec/Uploading when recording and uploading is done
simultaneously.
Figure 4.11: Status Bar - Rec/Uploading