Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 197)

USB Protocol Suite User Manual 197
Class/Vendor Decoding Options Teledyne LeCroy Corporation
For HID Interrupt In Endpoint, you will be provided a column to select the decoder with or
without the Report ID Field. See the figure below.
Figure 8.6: 1 Tran 1 Xfer column
The Isochronous Transfer Type options for an IN endpoint are:
 No Decoding
 CDC Data Isoch Out w/CMD Wrapper
 CDC Data Isoch Out w/Prot & CMD Wrapper
 CDC Data Isoch Out w/Prot Wrapper
 Video Isoch Out
The Interrupt Transfer Type options for an IN endpoint are:
 No Decoding
 Audio 1.0 Status Interrupt Endpoint
 Audio 2.0 Interrupt Data Message
 CCID Interrupt Message
 Comm Class Interrupt Notif
 CSDC Interrupt‐IN Notification
 HCI event
 HID Interrupt in Endp
 Hub Class Status Change Endp
 ICCD Interrupt Message
 Mass Strg CBI Interrupt Endp
 Mass Strg UFI CBI Interrupt Endp
 MBIM Interrupt Notif
 NCM Interrupt Notif
 RNDIS Interrupt Notification