11 loading and running the generation file, 1 starting traffic generation, 2 stop traffic generation – Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) User Manual
Page 371: 12 exporting a trace to a traffic generation file
USB Protocol Suite User Manual
371
Loading and Running the Generation File
Teledyne LeCroy Corporation
12.11 Loading and Running the Generation File
The USB 3.0 Traffic Generation files are scripts that instruct the Analyzer how to generate
USB 3.0 traffic. A traffic generation file contains text in special format and is named with a
*.usb3g extension. There are several examples of Traffic Generation files included with
the installation of the software.
To load a generation file:
1. Select File > Open ... from the menu to display the Open dialog box.
2. Select Usb3Script Files (*.usb3g) from the drop‐down menu marked Files of Type to
display a list of USB 3.0 Traffic Generation files.
3. Select a Traffic Generation file (*.usb3g).
4. Click Open.
12.11.1 Starting Traffic Generation
To start traffic generation, click
on the Tool Bar.
Click the Trace Preview
button to check the file.
12.11.2 Stop Traffic Generation
To instruct the Analyzer to halt traffic generation, click
on the Tool Bar.
12.12 Exporting a Trace to a Traffic Generation File
A simple way to create a script file is to open a trace and then to export the trace data to
a generation file.
To export:
1. Open a .usb file.
2. Click the Export to Script
button or select File > Export > Packets to USB 3.0
Exerciser Script(.usb3g) to display the Export Usb 3.0 Traces to Exerciser scripts
dialog (see
).