Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) User Manual
Page 344
Teledyne LeCroy Corporation
Format of Traffic Generation Files
344
USB Protocol Suite User Manual
et
0 to 3
Host Generation Only.
Assign a value for the et (High Speed SPLIT
Endpoint Type) field:
0 = Control
1 = Isoch
2 = bulk
3 = Interrupt
hird
4 bits (0‐15)
Host Generation Only.
Assign the Host Initiated Resume Duration.
Default value is 0. For a description of the
values 1 through 15, see the
Link Power Management Specification.
link_state
4 bits (0‐15)
Host Generation Only.
Assign the link state. Currently, the only legal
link_state value is 1, for L1 (Sleep).
Default value is 0, so set the link_state value to
1.
remote_wake
0 or 1
Host Generation Only.
Disable or enable Remote Wakeup. Default
value is 0, which disables Remote Wakeup. To
enable Remote Wakeup, set the value to 1.
eop
positive
integer
Assign a positive integer for the length of the
end of packet (EOP).
The default value is the correct length
(2 bits of SE0, 1 bit of J).
The value is reflected by
one bit of J.
hi_eop
(AB CD) Hex
Used to generate a high speed EOP pattern.
The bytes are in the order they come across the
bus, and the bits within the bytes are in LSB to
MSB order.
Maximum number of bytes allowed is 13.
Key Code
Format
Description