Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 300)

Teledyne LeCroy Corporation Recording Rules ‐ USB 3.0 (Voyager/Advisor T3 only)
300 USB Protocol Suite User Manual
10.8.1 Recording Rules Toolbar
The Recording Rules toolbar buttons control the Recording Rules page and are the same
as for the USB 2.0 Recording Rules (see
“Recording Rules Toolbar” on page 284 ).
Note:
If you have a wheel on the mouse, you can zoom by holding down the CTRL key and rolling the
mouse wheel.
10.8.2 Recording Rules Page: How It Works
You can think of the Recording Rules page as a workspace for creating recording rules
(rules that determine how the analyzer records traces). Recording rules are combinations
of events and actions. For how the Recording Rules page works, see
“Recording Rules
Page: How It Works” on page 286 .
Note: Recording Rules for USB 3.0 currently do not support more than two independent states.
10.8.3 Creating Event Buttons
To create a rule, first create one or more Event buttons. As you create Event buttons, they
appear in the Available Events area. You then can drag‐and‐drop them into the Main
Display area.
To create event buttons, see “Creating Event Buttons” on page 287 . The following events
are available for USB 3.0 recording rules (see Figure 10.27 on page 301 ):