Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 249)

USB Protocol Suite User Manual 249
Power Tracker Teledyne LeCroy Corporation
9.13.2 Decoded Fields view
See “Decoded Fields View” on page 204 for information.
9.13.3 Running Verification Scripts
You can perform custom post‐process analysis of the open trace by running a
verification script over the trace. A verification script instructs the application to send
trace and analysis information to the script. A verification script also contains script code
(written using Teledyne LeCroy Script Language) used to process trace data and output
that data in different formats.
Note: You may write your own verification scripts to perform custom verification and analysis. For
information on how to write a verification script, see the Verification Script Engine Reference
Manual.
To run a verification script over a trace:
1. Select the main menu item Report > Run verification scripts, or press Ctrl+Shift+U
or 
click the Run verification scripts button on the main tool bar.
The Run verification scripts dialog opens (see Figure 9.35 on page 250 ), from which
you choose, then run, one or several verification scripts:
Full Screen Change Power Tracker graph
type:
Bar, Line, and/or Point
Pointer Mode