Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 42)

Teledyne LeCroy Corporation Voyager M3/M3i Analyzer
42 USB Protocol Suite User Manual
2.1.4 Specifications
The Analyzer has the following specifications.
Power Requirements
90 to 254 VAC, 47 to 63 Hz (universal input), 100 W maximum
Environmental Conditions
Probing Characteristics
Switches
Recording Memory Size
1 GB or 4 GB for traffic data capture, timing, state and other data.
Operating
Temperature 0 to 55 °C (32 to 131 °F)
Storage Range ‐20 to 80 °C (‐4 to 176 °F)
Operating Humidity 10 to 90%, non‐condensing
Operating Altitude Up to 6560 feet (2000 meters)
Connection SuperSpeed connectors: The Voyager SuperSpeed
(3.0) analyzer and exerciser port differential input
impedance is between 80 and 120 ohms.
USB 3.0 cables
MMCX connectors for USB 3.0
High Speed USB Connectors
Standard cables
Note: The USB 2.0 exerciser port is not terminated
differentially. The single ended termination is
45 ohms to ground +/‐ 10% or between 40.5
and 49.5 ohms. The effective differential USB
2.0 termination is between 80 and 100 ohms 
(90 ohms +/‐ 10%).
Power On/off