Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 306)

Teledyne LeCroy Corporation Recording Rules ‐ USB 3.0 (Voyager/Advisor T3 only)
306 USB Protocol Suite User Manual
 RD Error
 DP Length Error
 Term On
 Term Off
 BCNT
 CRC32
 CRC16
 CRC5LCW
 CRC5LC
 Framing Error Triggers
 SLC
 SDP
 SHP
 END
 Low Power States
 U1
 U2
 U3
Note: Data Pattern Matching ‐ For USB 3.0, only the first 32 Byte positions can be matched for
triggering. It is not a floating window as it is for USB 2.0 Data Pattern Match.
Note: Warm Reset Trigger ‐ The position of this trigger in the file can be deceptive due to the
imbalance of traffic between the transmit and receive traffic. It can be helpful to hide upstream
or downstream traffic to see where it occurred with respect to traffic on the one stream.