Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) User Manual
Page 77
USB Protocol Suite User Manual
77
The Main Display Window
Teledyne LeCroy Corporation
Report
File Information
Displays information about the recording, such as the number of
packets and triggering setup.
See
“Trace Information” on page 210
.
Error Summary
Summarizes the errors throughout the recording. Allows for fast
navigation to packets with errors.
See
.
Timing
Calculations
Calculates timing between two packets and bus utilization.
See
“Timing Calculations” on page 218
Data View
Shows packet information.
See
.
Traffic Summary
Report
Summarizes the numbers and types of errors, packets, transactions,
split transactions, and transfers that occurred in the open trace.
See
“Traffic Summary Report” on page 222
.
Bus Utilization
Displays graphs of packet length, bus usage, and bus usage by device.
See
.
Link Tracker
Opens a window for displaying a detailed chronological view of
traffic. The window provides view and navigation options.
See
“Link Tracker (3.0)” on page 231
Navigator
Allows you to view the location of errors and triggers in a trace,
narrow the range of traffic on display, and jump to any point in the
trace.
See
“Using the Navigator” on page 235
.
Detail View
Displays details of selected packet.
See
Spec View
Shows packet header information and other items, in a view that
matches the USB 3.0 specification.
See
.
USB 3.0 Link State
Timing View
Graphically shows how much time the link spends in each link state.
See
“USB 3.0 Link State Timing View” on page 244
USB 3.0 LTSSM
view
Displays the LTSSM diagram depicted in the USB 3.0 specification.
See
“USB 3.0 LTSSM View” on page 246
.
Power Tracker
Displays voltage, current, and power.
See
Decoded Fields
View
Displays the
Decoded Fields View. See
.
Run Verification
Scripts
Opens a window to allow you to run verification scripts over the
open trace.
See
“Running Verification Scripts” on page 249
.
Menus
Functions