Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 40)

Teledyne LeCroy Corporation Voyager M3/M3i Analyzer
40 USB Protocol Suite User Manual
The features of the Analyzer are listed in the following table.
Features Function
Power Switch (0/1) Off/On
Status LED Blue if system successfully initializes
Red if hardware failure
Green while initializing
Analyzer Ports A (downstream) and B (upstream)
Analyzer LEDs
Rec Recording
Red if 2.0 recording enabled or 3.0 recording
enabled in Analyzer mode
3.0 USB 3.0
Off No traffic or LFPS
Solid Yellow Only Polling LFPS
Slow Flashing Yellow Low Power States
Fast Flashing Yellow Symbol Traffic, Training (TS1/TS2/TSEQ)
Solid Green Link Traffic (U0) LUP, LDN
Blinking Green TP's and DP's (actual traffic)
2.0 USB 2.0
Solid Yellow FS SOF's, LS EOP's, or control endpoint traffic
Slow Flashing Yellow LS Traffic on endpoints other than 0
(resets activity timer as in 3.0)
Fast Flashing Yellow FS Traffic on endpoints other than 0
(resets activity timer as in 3.0)
Solid Green HS SOF's or control endpoint traffic
Flashing Green HS traffic on endpoints other than 0
(resets activity timer as in 3.0)
Exerciser Ports
A (downstream) and B (upstream)
Exerciser LEDs
Gen Generating
Green if generating enabled
Rec Recording
Red if 3.0 recording enabled when in Exerciser
mode
3.0 USB 3.0
Off No traffic or LFPS
Solid Yellow Only Polling LFPS