Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 150)

Teledyne LeCroy Corporation Go to Selected Packet
150 USB Protocol Suite User Manual
6.2 Go to Selected Packet
To display a selected packet select Go to Selected Packet under Search on the Menu Bar.
6.3 Go to Packet/Transaction/Transfer
To display a specific packet:
1. From the menu bar, select the command 
Search > Go to Packet/Transaction/Transfer
to display the Go to Packet/Transaction/Transfer window:
Figure 6.2: Go To Packet/Transaction/Transfer Dialog
2. Select the desired viewing level (packet, transaction etc.) from the drop‐down menu
next to the words Go to.
3. Enter the number of the packet you want to display.
4. Click OK. The Trace View is repositioned with the selected packet at the top of your
screen. The resulting item will be shown as selected in the view.
6.4 Go to Marker
To instruct the Analyzer to display a marked packet:
1. Select Go to Marker under Search on the Menu Bar.
You see a drop‐down menu listing the marked packets in that Trace View:
Figure 6.3: Go To Marker Menu Option