Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 203)

USB Protocol Suite User Manual 203
General Options Teledyne LeCroy Corporation
8.3.7 Changing the Layout of Decode Requests
In the View ... Fields windows, the Decoding Information and the Descriptor information
blocks (following the Request Summary information) have the following columns:
 Field: such as bRequest, wValue, wIndex, bLength, bDescriptorType, wTotal‐
Length
 Length in bits
 Offset in bits
 Decoded: hex value typically equal to Hex Value
 Hex Value: hex value typically equal to Decoded
 Description: short description of field
To change the layout of decode requests display:
1. Click Layout to display the View ... Fields Dialog Layout dialog box.
Figure 8.11: View Transfer Fields Dialog Layout
2. To display the available columns of data, use the checkboxes for Length, Offset,
Decoded, Hex Value, and Description.
You can Check All or Uncheck All.
3. To show only the fields of Collapsed mode, check Show only fields specified for
view in collapsed mode.
4. To retain settings for future viewing of Decode Request fields, check Use these
settings when View Fields dialog opens.