Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 283)

USB Protocol Suite User Manual 283
Recording Rules ‐ USB 2.0 Teledyne LeCroy Corporation
10.7 Recording Rules - USB 2.0
Use the Recording Rules to set triggers and filters for USB 2.0.
Figure 10.15: Recording Rules USB 2.0 Dialog
The page has the following areas:
 Toolbar: Contains buttons that control the Recording Rules page.
 Available Events Area: Area where you can park Event buttons that you intend to
use in the Main Display area.
 Main Display Area: Area where you configure trigger and filter rules. You config‐
ure rules by dragging Event buttons from the Available Events area and then
assigning actions to those buttons.
 Config Status Indicator: A button that indicates if the rule is valid or invalid. If a
trigger or filter rule is configured correctly, the button is green and indicates Con‐
fig is Valid. If a rule is not configured correctly, the button is red and indicates
Config is Invalid.
Toolbar
Available

Events

Area
Config
Status
Indicator
Main
Display

Area