Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 183)

USB Protocol Suite User Manual 183
Saving/Loading Display Options Teledyne LeCroy Corporation
Figure 7.6: Level Hiding Dialog
7.6 Saving/Loading Display Options
You can save a set of Display Options values, make a set the default settings, or use a
saved set of values with the commands at the bottom of the Display Options window:
 To save the current Display Options values in an options file for use in future ses‐
sions, click Save. Enter a file name without a file name extension. The program
adds the .opt extension. (The file must have an .opt file name extension.)
 To load a previously saved .opt file, click Load and select a file name.
 To save the current Display Options values in the default.opt options file for use
as the default display options, click Save as Default. (Do not delete the
default.opt file.)
 To load the Default values, click Load Defaults. When you start the application,
this is the setting that is invoked automatically.
 To apply the current Display Options values, click Apply. The Display Options win‐
dow remains open.
 To apply the current Display Options values and close the Display Options win‐
dow, click OK.