Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 89)

USB Protocol Suite User Manual 89
Tool Bar Teledyne LeCroy Corporation
The Hiding Devices dialog is invoked as shown in Figure 4.3 on page 89 .
Check the upper level box (hierarchically) to hide all communications on an address, or
the lower level to hide individual endpoints.
Clicking on the Pin will make the dialog stay available after applying the hiding. The Class
is determined from the class decoder mapping, which could have occurred either
automatically or via the user applying it explicitly.
Figure 4.3: Hiding Devices Dialog
Check the upper level box (hierarchically) to hide all communications on an address, or
the lower level to hide individual endpoints.
Clicking on the Pin will make the dialog stay available after applying the hiding. The Class
is determined from the class decoder mapping, which could have occurred either
automatically or via the user applying it explicitly.
In various locations, the list of Link, Address, Endpoint and Direction is shown in the
Display Options dialog under the USB 2.0 Packet Hiding and USB 3.0 Packet Hiding tabs as
shown in
Figure 4.4 on page 90 .