Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 50)

Teledyne LeCroy Corporation Voyager M3x Analyzer
50 USB Protocol Suite User Manual
The features of the Analyzer are listed in the following table.
Features Function
Front Panel:
Power LED Green if plugged in and powered on
Status LED Blue if system successfully initializes
Red if hardware failure
Green while initializing
USB ports (Analyzer and
Exerciser) A (downstream) and B (upstream)
Analyzer LEDs
Rec Recording
Green if 2.0 recording enabled or 3.0
recording enabled in Analyzer mode
Trig Yellow when triggered
2.0 USB 2.0
Solid Yellow FS SOF's, LS EOP's, or control endpoint traffic
Slow Flashing Yellow LS Traffic on endpoints other than 0
(resets activity timer as in 3.0)
Fast Flashing Yellow FS Traffic on endpoints other than 0
(resets activity timer as in 3.0)
Solid Green HS SOF's or control endpoint traffic
Flashing Green HS traffic on endpoints other than 0
(resets activity timer as in 3.0)
3.0 USB 3.0
Off No traffic or LFPS
Solid Yellow Only Polling LFPS
Slow Flashing Yellow Low Power States
Fast Flashing Yellow Symbol Traffic, Training (TS1/TS2/TSEQ)
Solid Green Link Traffic (U0) LUP, LDN
Blinking Green TP's and DP's (actual traffic)
Exerciser Generating
Green if generating enabled
Trigger