1 trace view features – Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) User Manual
Page 70
Teledyne LeCroy Corporation
Your First USB Recording
70
USB Protocol Suite User Manual
10. To save a current recording for future reference, select File > Save As on the Menu
Bar.
OR
11. Click
on the Tool Bar to display the standard Save As window.
Give the recording a unique name and save it to the appropriate directory.
3.6.1
Trace View Features
After the recording terminates, the results display (see
).
The packet view display uses color and graphics to document captured traffic.
Packets are on separate rows, with individual fields both labeled and color‐
coded.
Packets are numbered sequentially (as recorded), time‐stamped (with a resolu‐
tion of 2 ns on 3.0 signalling), and highlighted to show the transmitted speed
(low‐speed, full‐speed, high‐speed, or superspeed).
You can name and save display formats for later use.
Data fields can collapse to occupy minimal space in the display.
Figure 3.11: Trace View Display
You can start the application from the Desktop or from the installed directory.
The display software can operate independently of the Analyzer. When used without the
Analyzer, the program functions in a Trace Viewer mode to view, analyze, and print