Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 218)

Teledyne LeCroy Corporation Timing Calculations
218 USB Protocol Suite User Manual
9.4 Timing Calculations
The Timing Calculator is used to measure timing between any two packets.
 Select Timing Calculations under Report in the Menu Bar
OR
 Click in the Tool Bar to display the Timing Calculator screen:
Figure 9.7: Timing Calculations Report
1. In the From beginning field, enter the first packet number or Markers.
2. In the To beginning of field, enter the last packet number or Markers.
3. In the Total Time field, select nanoseconds, microseconds, milliseconds, or
seconds.
4. Click the Show Formulas button to display the Formulas window (see Figure 9.8 on
page 219 , with the formulas used.
5. If you want to include only acknowledged packets, click the Acknowledged
checkbox. This will exclude non‐Acknowledged data transfers from the calculations,
leaving only the "effective" data transfer that the higher layers will see. (No re‐try's,
etc.)