Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 241)

USB Protocol Suite User Manual 241
Using the Navigator Teledyne LeCroy Corporation
The Navigator Legend dialog box has areas corresponding to each of the panes. Each area
has check boxes that allow you to hide/display information in the pane. You can set the
priority of information displayed in the panes using the up and down triangles on the
right.
Using the Legend to Show/Hide Navigator Panes
To use the legend to show/hide an entire pane, use the checkbox next to the name of
each pane in the legend.
In the case of the Pre/Post Trigger and Errors areas, the action of show/hide in the legend
is identical to that provided by Trace Navigator pop‐up menus.
In the case of the Traffic Types pane, there is no equivalent show/hide available through
the pop‐up menus.
Using the Legend to Set the Priority of Information Display
You can use the legend to set the priority of information displayed in the Pre/Post Trigger
Traffic Type panes. This is a two‐step process.
1. For a particular item in a pane, click the column next to the checkbox for the item.
That labels the item as currently active.
2. Next, use the up‐down arrows at the lower‐right of the area to move the item
higher or lower in priority.
In the case of the Traffic Type pane, priority determines display priority of each packet
type. For portions of the trace that are dominated by a particular packet type, this setting
no effect: only the color corresponding to that packet type is displayed in that portion of
the pane. Suppose, however, that part of the trace includes equal or near equal numbers
of several types of packets. In that case, you can use the legend to select which among
those types is represented in that portion of the Traffic Types pane. This allows you to
view only packets of interest in crowded portions of the trace display.