Accton Technology ES4710BD - Manual (Page 98)

97
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Switch#reload
5.1.12 setup
Command: setup
Function: Enters the Setup Mode of the switch.
Command mode: Admin Mode
Usage Guide: ES4710BD provides a Setup Mode, in which the user can configure IP addresses, etc.
5.1.13 language
Command: language {chinese|english}
Function: Sets the language for displaying the help information.
Parameters: chinese for Chinese display; english for English display.
Command mode: Admin Mode
Default: The default setting is English..
Usage Guide: ES4710BD provides help information in two languages, the user can select the
language according to their preference. After the system restart, the help information display will
revert to English.
5.1.14 write
Command: write
Function: Saves the currently configured parameters to the Flash memory.
Command mode: Admin Mode
Usage Guide: After a set of configurations with desired functions, the setting should be saved to the
Flash memory, so that the system can revert to the saved configuration automatically in the case of
accidental power down or power failure. This is the equivalent to the copy running-config
startup-config command.
Related commands: copy running-config startup-config
5.2 Maintenance and Debug Commands
When users configure the switch, they will need to verify whether the configurations are
correct and the switch is operating as expected, and in the case of network failure, the users will also
need to diagnose the problem. ES4710BD provides various debugging methods including ping,
Telnet, show, debug, etc. to help the users to check system configuration, operating status and locate
problem causes.
5.2.1 ping
Command: ping [<ip-addr>]