Accton Technology ES4710BD - Manual (Page 330)

329
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
15.3 SNTP Troubleshooting Help
15.3.1 Monitor and Debug Commands
15.3.1.1 show sntp
Command: show sntp
Function: Displays current SNTP client configuration and server status.
Parameters: N/A.
Command mode: Admin Mode
Example: Displaying current SNTP configuration.
Switch#show sntp
SNTP server Version Last Receive
2.1.0.2 1 never
15.3.1.2 debug sntp
Command: debug sntp {adjust | packets | select }
no debug sntp {adjust | packets | select}
Function: Displays or disables SNTP debug information.
Parameters: adjust stands for SNTP clock adjustment information; packet for SNTP packets,
select for SNTP clock selection.
Command mode: Admin Mode
Example: Displaying debugging information for SNTP packets.
Switch#debug sntp packets
15.4 WEB MANAGEMENT
Click “SNTP configuration” to open the switch SNTP configuration management list. Users may
then make configuration to switch’s SNTP settings.
15.4.1 SNMP/NTP server configuration
Click “SNTP configuration”, “SNTP/NTP server configuration” to configure SNTP/NTP server
address and server version. Same as CLI command 15.1.1
Example: Configure Server address as 10.1.1.1, configure version as 4, and then, Click Apply button
to apply the configuration to switch.