Accton Technology ES4710BD - Manual (Page 224)

223
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Click “Vlan configuration”, “GVRP configuration”, “GVRP configuration” to configure GVRP
parameters of the switch：
z Port: specified port
z Join timer (100~327650ms): configures the value of GARP join timer. Equals to CLI
command 9.3.2.1
z Leave timer (100~327650ms): configures the value of GARP leave timer. Equals to CLI
command 9.3.2.2
z Hold timer (100~327650ms): configures the value of GARP hold timer. Equals to CLI
command 9.2.3.3
z Leaveall timer (100~327650ms): configures the value of GARP leaveall timer. Equals to
CLI command 9.2.3.4
Example: Select Ethernet port 1/1, setup Join timer as 200, Leave timers as 100, Hold timer as 400,
Leaveall timer as 800. Click the Apply button to apply these settings to the switch.
9.5.3 Vlan debug and maintenance
Click “Vlan configuration”, “Vlan debug” and “maintenance” to open VLAN debug management
list to display related VLAN configuration information through the list.
9.5.3.1 Show vlan
Click “Vlan configuration”, “Vlan debug” and “maintenance”, “show Vlan” The display window in
the right will display all related VLAN information. Equals to CLI command 9.4.1.1.