Accton Technology ES4710BD - Manual (Page 373)

372
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
and packets without route.
ICMP statistics： ICMP packet statistics.
Rcvd： 0 total 0 errors 0 time exceeded
0 redirects, 0 unreachable, 0 echo, 0 echo
replies
0 mask requests, 0 mask replies, 0 quench
0 parameter, 0 timestamp, 0 timestamp
replies
Statistics of total ICMP packets
received and classified information
Sent： 0 total 0 errors 0 time exceeded
0 redirects, 0 unreachable, 0 echo, 0 echo
replies
0 mask requests, 0 mask replies, 0 quench
0 parameter, 0 timestamp, 0 timestamp
replies
Statistics of total ICMP packets sent
and classified information
TCP statistics: TCP packet statistics.
UDP statistics: UDP packet statistics.
17.2.3.1.2 debug ip packet
Command: debug ip packet
no debug ip packet
Function: Enable the IP packet debug function: the “no debug IP packet” command disables
this debug function.
Default: IP packet debugging information is disabled by default.
Command mode: Admin Mode
Usage Guide: Displays statistics for IP packets received/sent, including source/destination address
and bytes, etc.
Example: Enabling IP packet debug.
Switch#debug ip pa
ip packet debug is on
Switch#
Switch#
Switch#
Switch#%Apr 19 15:56:33 2005 IP PACKET: rcvd, src 192.168.2.100, dst 192.168.2.1
, size 60, Ethernet0
17.3 ARP
17.3.1 Introduction to ARP
ARP (Address Resolution Protocol) is mainly used in IP address to Ethernet MAC address
resolution. ES4710BD supports both dynamic ARP and static configuration. Furthermore,