Accton Technology ES4710BD - Manual (Page 151)

150
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
z
Telnet server State－to choose from the drop-down list. (“Open” and “Close” service) Please
refer to the CLI command 5.2.2.3.3.
„
User name－a specific name of the Telnet user
„ Password－to configure a specific password
„ Encrypted text－to configure whether the password is encrypted when displaying
configuration information.
„ Operation－includes “Remove user” and “Add user”
Example: set the Telnet user name as “switch” and password as “switch” and then click on the
“Apply” button.
5.6.8.2 Telnet security IP
„ Users should click “Telnet server configuration” and “Telnet security IP” to configure
the security IP address of an allowed Telnet client for when the switch functions as the
Telnet server. Please refer to the CLI command 5.2.2.3.4. Words and phrases are
explained in the following:
„ Security IP address－a specific security IP address
„ Operation－to choose from the drop-down list. (“Add Security IP address” and “Remove
Security IP address”)
„
Example: set “security ip” as “100.1.1.1” to the switch and then click on “Apply”.