Accton Technology ES4710BD - Manual (Page 399)

398
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
default metric 16
neighbour is
preference is 100
Displayed information Explanation
rip is turning on RIP routing is enabled
default metric 16 The default metric for introduced route is 16
neighbour is The specified destination address
preference is 100 RIP routing priority is 100
18.3.2.2.22 debug ip rip packet
Command: debug ip rip packet
no debug ip rip packet
Function: Enables the RIP packet debugging function for sending/receiving: the “no debug IP
packet” command disables this debugging function.
Default: Debugging is disabled by default.
Command mode: Admin Mode
Example:
Switch#debug ip rip pa
"debug ip rip pa" executed successfully.
00：04：20：
start at 260*********************
send packets to 11.11.11.2
packet header： cmd： response, version： 1
no. dest dest_mask gatedway metric
1： 159.226.0.0 0.0.0.0 0.0.0.0 1
00：04：20：
start at 260*********************
send packets to 159.226.255.255
packet header： cmd： response, version： 1
no. dest dest_mask gatedway metric
1： 159.222.0.0 0.0.0.0 0.0.0.0 2
2： 11.11.11.2 0.0.0.0 0.0.0.0 2
00：04：20：
start at 260*********************