Accton Technology ES4710BD - Manual (Page 427)

426
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
router ip addr IP address of the interface in the neighboring layer 3
switch
state Link-state status
priority Priority
DR ID of the designated layer 3 switch
BDR ID of the backup designated layer 3 switch
last hello The last HELLO packet
last exch The last packet exchanged
18.4.2.2.28 show ip ospf routing
Command: show ip ospf routing
Function: Displays OSPF route table information.
Default: Nothing displayed by default
Command mode: Admin Mode
Example:
Switch#show ip ospf routing
AS internal routes：
Destination Area Cost Dest Type Next Hop ADV rtr
60.2.127.0 0 7 DTYPE_NET 12.1.1.2 6.1.1.2
60.1.132.0 0 7 DTYPE_NET 12.1.1.2 6.1.1.2
60.4.67.0 0 7 DTYPE_NET 12.1.1.2 6.1.1.2
60.3.72.0 0 7 DTYPE_NET 12.1.1.2 6.1.1.2
60.2.77.0 0 7 DTYPE_NET 12.1.1.2 6.1.1.2
AS external routes：
Destination Cost Dest Type Next Hop ADV rtr
Displayed information Explanation
AS internal routes Autonomous system interior route
AS external routes Autonomous system exterior route
Destination Destination network segment
Area Area number
Cost Cost value
Dest Type Route Type
Next Hop Next hop
ADV rtr Advertise the interface address of the layer 3 switch
18.4.2.2.29 show ip ospf virtual-links
Command: show ip ospf virtual-links