5 set rip timer, 3 ospf, 1 enable ospf protocol – Accton Technology ES4710BD User Manual
Page 450: 1 enable/disable ospf protocol
449
E
ES4710BD 10 Slots L2/L3/L4 Chassis Switch
18.5.2.2.5 Set RIP timer
Click “RIP timer configuration” to enter the configuration page. Equivalent to CLI command
18.3.2.2.18
z
Update time: sending update packet time interval
z
Invalid timer: RIP route invalid time
z
Holddown timer: specified invalid routes existing interval in the routing table
Example:
18.5.3 OSPF
Click “OSPF configuration” to open OSPF configuration. Includes:
z
OSPF enable: enables OSPF protocol
z
OSPF TX-parameter configuration: configures OSPF forwarding packet parameter
z
Imported route parameter configuration: configures OSPF imported route parameter
z
Other parameter configuration: configures other parameter of OSPG protocol
z
OSPF debug: OSPF debugging message.
18.5.3.1 Enable OSPF protocol
Click “OSPF enable” to open the configuration table. Includes:
z
OSPF enable: enables/disables OSPF protocol
z
Router-ID configuration: configures the router ID number of the OSPF protocol
z
OSPF network range configuration: configures OSPF network range of OSPF
z
OSPF area configuration for port: configures OSPF area for port
18.5.3.1.1 Enable/Disable OSPF protocol