Accton Technology ES4710BD - Manual (Page 513)

512
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Global Mode
radius-server key
no radius-server key
Specifies the key for RADIUS server; the “no radius-server
key” command deletes the key for RADIUS server.
2) Configuring RADIUS Server
Command Explanation
Global Mode
radius-server authentication
host [[port
{}] [primary]]
no radius-server
authentication host
Specifies the IP address and listening port number for
RADIUS authentication server; the “no radius-server
authentication host ” command deletes the
RADIUS server
radius-server accounting host
[[port
{}] [primary]]
no radius-server accounting
host
Specifies the IP address and listening port number for
RADIUS accounting server; the “no radius-server
authentication host ” command deletes the
RADIUS server
3) Configure RADIUS Service parameters.
Command Explanation
Global Mode
radius-server dead-time
no radius-server dead-time Configures the restore time when RADIUS server is down;
the “no radius-server dead-time” command restores the
default setting.
radius-server retransmit
no radius-server retransmit Configures the re-transmission times for RADIUS; the “no
radius-server retransmit” command restores the default
setting
radius-server timeout
no radius-server timeout Configures the timeout timer for RADIUS server; the “no
radius-server timeout” command restores the default
setting.
20.2.2 802.1x Configuration Commands
20.2.2.1 aaa enable
Command: aaa enable
no aaa enable
Function: Enables the AAA authentication function in the switch; the "no AAA enable" command
disables the AAA authentication function.
Command mode: Global Mode
Parameters: N/A.
Default: AAA authentication is not enabled by default.