Accton Technology ES4710BD - Manual (Page 259)

258
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
The configuration of Switch2 is the same as the switch in scenario 1, Switch1 takes the place of
Multicast Router in scenario 1. Let’s assume VLAN 60 is configured in Switch1, including ports 1,
2, 6, 10 and 12. Port 1 connects to the multicast server, and port 2 connects to Switch2. In order to
send Query at regular interval, IGMP query must enabled in Global mode and in VLAN60.
The configuration steps are listed below:
Switch1#config
Switch1(Config)#ip igmp snooping
Switch1(Config)#ip igmp snooping vlan 60 query
Switch2#config
Switch2(Config)#ip igmp snooping
Switch2(Config)#ip igmp snooping vlan 100
Switch2(Config)#ip igmp snooping vlan 100 mrouter interface ethernet 1/1
Multicast Configuration
The same as scenario 1.
IGMP Snooping listening result:
Similar to scenario 1.
11.4 IGMP Snooping Troubleshooting Help
11.4.1 Monitor and Debug Commands
11.4.1.1 show ip igmp snooping
Command: show ip igmp snooping [vlan <vlan-id>]
Parameters: is id of VLAN to display the IGMP Snooping information.
Command mode: Admin Mode
Usage Guide: If VLAN id is not specified, then summary information for IGMP Snooping and
Query in all VLAN will be displayed. If VLAN id is specified, then detailed
information for IGMP Snooping and Query of the specified VLAN will be displayed.
Example:
1. Displaying the summary information of IGMP Snooping and Query for the switch.
Switch# show ip igmp snooping
igmp snooping status :Enabled