Accton Technology ES4710BD - Manual (Page 477)

476
E ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Expires The remaining time before considering the neighbor to be
invalid.
19.4.4.1.3 show ip pim mroute sm
Command: show ip pim mroute sm
Function: Displays the PIM-SM packet forwarding entry
Parameters: N/A.
Default: No display by default.
Command mode: Admin Mode
Usage Guide: This command is used to display PIM-SM multicast forwarding entries, or the
forwarding entries in the system FIB table for forwarding multicast packets.
Example:
Switch # show ip pim mroute sm
BIT Proto: DVMRP 0x2, PIM 0x8, PIMSM 0x10, PIMDM 0x20;
Flags: RPT 0x1, WC 0x2, SPT 0x4, NEG CACHE 0x8, JOIN SUPP 0x10;
Downstream: IGMP 0x1, NBR 0x2, WC 0x4, RP 0x8, STATIC 0x10;
PIMSM Group Table, inodes 1 routes 1:
(192.1.1.1, 225.0.0.1), protos: 0x8, flags: 0x0, 00:10:18/00:03:18
Incoming interface : Vlan1, RPF Nbr 0.0.0.0, pref 0, metric 0
Outgoing interface list:
(Vlan2), protos: 0x2, UpTime: 00:10:18, Exp:00:03:18
Switch #
Displayed information Explanation
(192.1.1.1, 225.0.0.1) Forwarding entry.
Incoming interface Incoming interface, or RPF interface.
Outgoing interface list Outgoing interface list.
19.4.4.1.4 show ip pim neighbor
Command: show ip pim neighbor [<ifname>]
Function: Displays information for neighbors of the PIM interface.
Parameters: is the interface name, i.e., displays PIM neighbor information of the
specified interface.
Default: No display by default.
Command mode: Admin Mode
Usage Guide: If no interface name is specified, then neighbor information for all interfaces will be
displayed.
Example: Displaying neighbor information for all interfaces (do not specify the interface name)
Switch # show ip pim neighbor
Neighbor-Address Interface ifIndex Uptime Expires DR-state
192.3.1.3 Vlan1 28 00:11:39 00:01:16 DR